permit single command from ACS

[KeithN123]

I need to be able to permit only "show logging" for a specific user group on TACACS. Can anyone tell me if this is possible ? I have tried most privilege levels but still the default for each privilege remains.

regards

[Jagdeep Gambhir · Accepted solution]

Keith,

You need to setup command authorization on acs. Please checkout this link,

http://cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

Regards,

~JG

Do rate helpful posts

[KeithN123]

jg

many thanks for your assistance - this has sorted the problem for me