12-14-2014 10:50 PM - edited 03-10-2019 10:16 PM
Hi
Anybody pleade hint me config ISE1.2
I need to do separated ssid called on-board. Once non registed device comes in, ISE get sredirect to registering portal.
I can finish self fill in device register which user need to fill in his MAC manually. And I also finish dual ssid practice as dCloud ISE demo. However I need configure in between of those.
Anyone please give me configures or suggestions
Thank you
Nipat
Solved! Go to Solution.
12-15-2014 03:27 AM
Hello Nipat. This is not possible in version 1.2. In version 1.2 you have two options to get the device registration process:
1. DRW (Device Registration Web Auth): But this method cannot be combined with any other authentication methods
2. NSP (Native Supplicant Provisioning): You already knew about this one but it sounds like it is not an option
You can look into upgrading to 1.3 as i believe you will be able to "chain" the CWA and DRW methods with other authentication methods.
Thank you for rating helpful posts!
12-16-2014 03:40 AM
this scenario is not possible wit 1.2 , In Release 1.3, if the Automatically register guest devices check box is checked, then the device is automatically added to the endpoint identity group and the guest ID is associated with it automatically.
12-15-2014 03:27 AM
Hello Nipat. This is not possible in version 1.2. In version 1.2 you have two options to get the device registration process:
1. DRW (Device Registration Web Auth): But this method cannot be combined with any other authentication methods
2. NSP (Native Supplicant Provisioning): You already knew about this one but it sounds like it is not an option
You can look into upgrading to 1.3 as i believe you will be able to "chain" the CWA and DRW methods with other authentication methods.
Thank you for rating helpful posts!
12-16-2014 03:40 AM
this scenario is not possible wit 1.2 , In Release 1.3, if the Automatically register guest devices check box is checked, then the device is automatically added to the endpoint identity group and the guest ID is associated with it automatically.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide