Dear All,
We are using Cisco Posture Assessment over wireless with AnyConnect web agent.
Everything working fine and device is in compliant state and I can see logs in Posture Detail Assessment report.
But the SSID is disconnected as soon as it gets compliant state.
Here we are using ISE 1.3 with patch 5 and Cisco AIR-CT5760 as WLC.
I can see below log in WLC
LSL-DCAS08-WLC01#
.Dec 27 14:35:28.156: *%APF-4-ADD_TO_BLACKLIST_REASON: 1 wcm: Client f4f2.6d0b.c785 (AuditSessionID: 0af90a0b567ff6cb00020e6d) was added to exclusion list. Reason: Client EPM policy plumb failure
LSL-DCAS08-WLC01#
Appreciate about any help
Regards,
Pradeep