I'm using ACS for windows server Release 3.2(3) Build 11 performing AP's management admin through TACACS+, LEAP authentic to WDS through RADIUS (aironet), PEAP for wireless clients through Radius aironet and IPSec on VPN Concentrator through Radius vpn 3000 concentrator.
After i've created an entry on Proxy Distribution table @xxx for acs server striping this suffix and default for externally Radiator, i've registered the following:
- Everything works fine except PEAP and VPN clients without authentication.
From PEAP, the user appears with realm which seems strip is not working for PEAP
From VPN users, ACS entry is registered as pass authentication but VPNConcentrator gives the following error:
"8 03/11/2005 13:15:48.130 SEV=3 AUTH/5 RPT=496 1.1.1.1
Authentication rejected: Reason = Unspecified
handle = 428, server = 10.10.10.10, user = <ACL>, domain = <not specified>"
Can this behavior to be caused by a bug release?
Grateful for any support
Thanks
Nuno Santos
