09-19-2018 02:26 AM
Hi
I'm trying to send attribute 30(called station) in my radius accounting session. This is working fine for attribute 31 (calling-station).
I have the command "radius-server attribute 30 original-called-number" in my configuration.
Any idea what could be causing this?
thanks in advance
Solved! Go to Solution.
09-19-2018 03:25 AM
Do you see the Called-Station-Id in the access request from the NAS to ISE?
Normally the NAS should include that automatically in all future Accounting requests if the Authentication was successful.
Failing that, can you try
radius-server vsa send accounting
Sorry I don't deal much with IOS devices these days.
09-19-2018 04:02 PM
I realised after I sent my reply that Called-Station-Id is not a VSA (Vendor Specific Attribute) so therefore it would not have made a different. Apologies. But the fact that you don't see it in the Access-Request means that the NAS will not be able to generate Accounting requests containing that attribute.
So the key thing is to find that command that adds the Called-Station-Id into all Access-Requests. I thought that IOS did that by default. More googling ... or if you have the patience, open a TAC case.
09-19-2018 03:25 AM
Do you see the Called-Station-Id in the access request from the NAS to ISE?
Normally the NAS should include that automatically in all future Accounting requests if the Authentication was successful.
Failing that, can you try
radius-server vsa send accounting
Sorry I don't deal much with IOS devices these days.
09-19-2018 04:43 AM
Hi
thanks for your quick reply No I don't see the attribute in my request (debug aaa accounting), I do see other attributes (including for example calling-station-id)
I have added the comand you mentioned, but the result is the same
09-19-2018 12:22 PM
09-20-2018 06:37 AM
ok Will do, just wanted to make sure that I wasn't missing anything in the configuration.
09-19-2018 04:02 PM
I realised after I sent my reply that Called-Station-Id is not a VSA (Vendor Specific Attribute) so therefore it would not have made a different. Apologies. But the fact that you don't see it in the Access-Request means that the NAS will not be able to generate Accounting requests containing that attribute.
So the key thing is to find that command that adds the Called-Station-Id into all Access-Requests. I thought that IOS did that by default. More googling ... or if you have the patience, open a TAC case.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide