Remediation via SCCM Reimage

[jarosner]

Can ISE integrate with Microsoft SCCM to reimage a workstation?

[Timothy Abbott · Accepted solution]

Hi Jason,

ISE 2.0 does integrate with SCCM for patch management, but unfortunately it does not support re-imaging a workstation.

Regards,

-Tim

[howon]

Jason, SCCM re-image of workstation requires PXE booting and possibly WoL which is somewhat independent of ISE. PXE booting devices will often fail authentication and your 802.1X/MAB settings on the switch and ISE will need to provide minimum access to the network so that the machine can be re-imaged. Typically this requires access to DHCP, TFTP and DNS.

Hosuk