04-27-2007 08:10 AM - edited 03-10-2019 03:07 PM
Has anyone have a config I could follow to set this up? Under External user Databases I don't see RSA SecurID. I have to install the RSA Authentication Agent? How would I get access to the Windows side of this ACS server if I have to do that? Any help would be much appreciated. many thanks
04-27-2007 11:44 PM
You are right. In order to use RSA SecurID, you will need to install the local authentication agent on the ACS server. You don't need to activate any challenge settings on the server itself, just need the agent.
Once you have the agent, go into external databases and under RSA securid once you click configure, you will automatically be able to use it.
Let me know if you need more info.
04-30-2007 10:35 AM
Thanks for the response..ok let me give you a little more info on my setup. I have a Cisco 1112 ACS server running Windows ACS 4.0... We just purchased a RSA appliance. If I click on external Databases in ACS i don't see any option for RSA token server. I do have a option for a Radius Token server. Will I see the RSA option after I install the Local authentication Agent. Also I don't have access to Windows on the Cisco 1112. Were would I install this RSA agent? Hope this helps. Many thanks!
04-30-2007 12:32 PM
My initial post assumed that you ACS for Windows.
Follow the instructions in the following document to configure RSA token server in your scenario.
http://rsasecurity.agora.com/rsasecured/guides/imp_pdfs/Cisco_ACS_333_11_AuthMan6.1.pdf
I don't what is the version of your RSA server but I think this document should help.
04-30-2007 04:40 PM
we do not have any option to install RSA agent with ACS appliance.
So we need to configure RSA as Radius token server with ACS appliance.
05-08-2007 06:40 AM
Thank everyone for your help!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide