Showing results for 
Search instead for 
Did you mean: 

Smart Lic via proxy server not sending Http traffic

Level 1
Level 1

Hello All

I have created a Proxy for the Smart Lic and I am testing this on a 9200 Switch.  I have enable the following command and waiting to see if they switch will send the Http request to the proxy server.  Since this is the only device I have set to send to this proxy I should only see this traffic but I am not.

I have used the steps notes in this url " " and I also have set the following commands

ip http client source-interface Vlan105

ip http client proxy-server proxy-port 3128


http-proxy "" port 3128
profile "test-proxy-srv"
reporting smart-licensing-data
destination transport-method http
no destination transport-method email
destination address http

I have looked at the " show license eventlog " to see if there is a reason why I am not getting the traffic to flow via the proxy but

2023-09-25 13:28:06.840 CDT SAEVT_INIT_SYSTEM_INIT
2023-09-25 13:28:07.847 CDT SAEVT_INIT_CRYPTO success="False" error="Crypto Initialization has not been completed"
2023-09-25 13:28:37.847 CDT SAEVT_INIT_CRYPTO success="True"
2023-09-25 13:28:37.851 CDT SAEVT_COMM_RESTORED
2023-09-25 13:28:37.922 CDT SAEVT_INIT_COMPLETE
2023-09-25 13:29:32.982 CDT SAEVT_COMM_FAIL error="Unable to resolve server hostname/domain name"
2023-09-25 13:29:34.157 CDT SAEVT_UTILITY_REPORT_START
2023-09-25 13:29:37.848 CDT SAEVT_PRIVACY_CHANGED enabled="True"
2023-09-25 13:51:01.299 CDT SAEVT_CONFIG_PERSISTED

I am able to ping without issue but I do not see this traffic going to the out or am I missing something.

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 32/33/36 ms

If you can tell me what I could be missing or a command I need to run to ID the issue .

thank you




1 Reply 1

Greg Gibbs
Cisco Employee
Cisco Employee

This space is intended for questions related to NAC solutions like Cisco ISE.

This question would be better posted to the Switching space -


Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: