Sources addresses need be changed.

[xbw]

I have a case which is showed in attachments.That is in pix outside interface changed the sourecs addresses as illustrate.How can I config the pix.

the changed sources addresses doesn't in the same network with the pix outside interface's.

[spremkumar]

Hi

i feel you want to change the source ip of the packets coming from outside world especially from the 3 networks mentioned in ur figure.

i feel you can make use of ip nat source outside source list command to modify the same.

But do remember you can configure this up in your router also refer this link for more info on the same..

http://cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml

regds