ssh authenticating through tacacs

[griffith2009]

I have a server Acs 3.3, and authentic via tacacs, through telnet. This is the configuration that i have in the routers:

aaa authentication login default group tacacs+ local

aaa authentication enable default group tacacs+ enable

aaa authentication ppp default if-needed group tacacs+ local

aaa authorization exec default group tacacs+ local

aaa authorization commands 15 default group tacacs+ local

aaa authorization network default group tacacs+ local

aaa accounting commands 15 default start-stop group tacacs

tacacs-server host s.s.s.s

tacacs-server directed-request

tacacs-server key 7 xxxxxxxxxxxxxxxx

Line vty 0 4

password 7 ppppppppppppppppp

What should i do to connect to all routers via ssh? And Continue authenticating through tacacs

[Richard Burts]

This question is also posted in the WAN Routing and Switching forum where it has received several replies. I suggest that any further discussion be consolidated in the WAN Routing and Switching forum.

HTH

Rick