ssh authenticating through tacacs
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-03-2009 06:15 PM - edited 03-10-2019 04:15 PM
I have a server Acs 3.3, and authentic via tacacs, through telnet. This is the configuration that i have in the routers:
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authentication ppp default if-needed group tacacs+ local
aaa authorization exec default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa authorization network default group tacacs+ local
aaa accounting commands 15 default start-stop group tacacs
tacacs-server host s.s.s.s
tacacs-server directed-request
tacacs-server key 7 xxxxxxxxxxxxxxxx
Line vty 0 4
password 7 ppppppppppppppppp
What should i do to connect to all routers via ssh? And Continue authenticating through tacacs
- Labels:
-
AAA
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-04-2009 03:40 PM
This question is also posted in the WAN Routing and Switching forum where it has received several replies. I suggest that any further discussion be consolidated in the WAN Routing and Switching forum.
HTH
Rick
Rick
