Tacacs+ authentication with HTTP server (VSM) on Cat3524

[christophe.savoy]

Hello,

I configured Tacacs+ as the authentication method for accessing my Catalysts 3524 with Telnet. This works well, with CiscoSecure V2.4 as the Tacacs server. My Cat3524 are running version 12.0(5.4)WC(1).

I now try to use Tacacs+ as authentication method for the http access and have some troubles... does not work.

I found the following document on the CCC, describing the configurations of both an IOS equipment and the tacacs server :

http://www.cisco.com/warp/public/480/http-2.html

I made what is described in this document... no way... this still does not work...

Does anybody already use TACACS+ as the authentication method for accessing the HTTP server (VSM) of Catalyst 3524 switches.

Thanks in advance

Christophe

[ciscomoderator]

Often times complex configuration/troubleshooting issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.