Network Access Control

for callback user,i want to add prefix 9 to his number(the number specified specified by user).actually the modems are goup hunted on one number and i defined user specified number for callback and the router need to dial 9 and the user specified num...

In the process of setting up a 7206 to terminate ADSL connections, using a Radiator (Radius) server for auth.The test ADSL connection appears to authenticate successfuly, but then disconnect immediately, then attempt to authenticate again.I am seeing...

Hello,I've a customer with 2 ACS and several NASes (about 20). 2 of these NAS have toll free numbers, so I want to make sure that some users could not use these numbers and other users could. In other words I want that some groups of users could not ...

After our ACS server has been running for a few weeks we get this error message after entering a username and password when trying lo logon to ACS ".....all Administration ports are currently in use"I've tried stopping CSMon and CSAdmin for a few min...

Hi,I use a Cisco3640 for dialin and dialout. For the dialout I would need accounting of the calls since there is a billing needed. We use a ACS unix 2.3(6.1) as tacacs-server.On the router there are dialer profiles which are used for dialin and dialo...

anything extra that has to be done to have the machine authenticate. I have a machine account, I have peap for machine accounts enabled on acs 3.2. I have the check mark for use computer account when no user info available. Appears to be sending t...

Hello to all. I have an 827H running 12.2(8)YJ1 trying to establish a tunnel to a 3015 concentrator. I'm having trouble getting the tunnel up and am a little confused as to the encryption settings. I am told I have to use the following:Hash Algo ESP/...

I have ACS3.1 (radius server) , and I would like to create an administator user, with authorization of ReadOnly , with no abilites to change attributes.also is it possible to use authentication/authorization for users who access the ACS via the serve...

Is there a possibility to limit telnet of pcs to core swithes with acl or other ways? I mean, for example, in a typical lan, two core layer 3 switches, server layer 2 access switches connected to both core switchers, my objective is to limit som...

I have the following set up...Win2K with RADIUS running and working with authentication of my PPTP sessions on my PIX515...I have verified it works with multiple user accounts...I would like to start exspanding RADIUS to authenticate more than just m...

I have setup a table in a SQL Server 2000 database with user names and passwords for testing purposes and when trying to run the stored procedure creation script for CHAP (per the ACS user guide instructions), I get a lot of errors. They are:Error:Se...

I have a client with a VPN 3005 concentrator, and they want to authenticate against their Windows 2000 Active Directory. However, the AD servers are running in Mixed-mode.I have tried to configure the VPN 3005 concentrator to authenticate against the...

Hi:I already bouught VMS and am about to install it. Have mainly three questions:1.- I want to install it in same server I installed Cisco Secure ACS. Because with ACS I used the Common Services CD, but with version 2.0, I see that with my VMS I rec...

Hi,Initially all my clients are Window 98 users and they have no problem mapping their drive after successfully dialin to my company domain. The login script execute qutomatically after their username and password is authenticate via ACS.Currently, I...

Hi ,I have installed RADIUS Server on Windows 2000 Server, I am able to login using windows 2000 User ID. But not able to login directly to pril level.How can i do this ?Following is my config on router,aaa new-modelaaa authentication login default g...