09-09-2018 10:01 AM - edited 03-11-2019 01:49 AM
Hello,
I want to ask about Configuration WCCP on my Catalyst 6509.
This is the topology:
This is WCCP configuration on my device 10.204.20.1:
ip access-list standard WAVE
permit 10.204.19.68
ip access-list extended WAAS-REDIRECT-LIST
permit tcp any 10.141.1.0 0.0.0.255
permit tcp 10.141.1.0 0.0.0.255 any
ip wccp 61 redirect-list WAAS-REDIRECT-LIST group-list WAVE
Interface Eth1/1
ip wccp 61 redirect in
Interface Eth1/2
ip wccp 61 redirect in
What I confused is:
1. Can I configure with only WCCP 61?
2. Can I only use it to intercept that traffic and send packet to my WAE (10.204.19.68)?
3. Can you explain what function of this command "ip wccp 61 redirect-list WAAS-REDIRECT-LIST group-list WAVE"?
09-09-2018 10:57 AM
3. Can you explain what function of this command "ip wccp 61 redirect-list WAAS-REDIRECT-LIST group-list WAVE"?
When you specify the ip wccp redirect-list command, only packets that match the access list are redirected.
09-09-2018 11:40 AM
Hi balaji,
And, can you answer my question number 1 and number 2?
09-09-2018 11:52 AM - edited 09-09-2018 11:53 AM
Yes and possible. if you understand which side you are interception the traffic.
09-09-2018 11:56 AM
So, how is about Service Group 62 ?
is not need configure it wccp 62 on the WAN Link?
09-09-2018 11:58 AM
Depends on your requirement.
This example document explains more information for your understanding.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide