Team, good day ! Customer got old ISE mobility licenses: ISE-M-3YR-500 which will expire in a month or so. We cannot offer any mobility migrations now, as far as I understand. Do Base licenses will expire also ? Should customer buy new base license...
Good Morning Team, I was hoping someone might have done this in the past or at least guide me in the right direction. I am trying to deploy 2FA(CAC, smart card) portal access for out Cisco ISE 2.4 but running into few problems. I am currently c...
Hi, I'm with a problem with my ACS that can't access via WEB analyzing via cli I see the status below: show application status acs ACS role: PRIMARY Process 'database' running Process 'management' running (HTTP...
Can anyone save me from ACL hell. I am trying to configure a dacl to be applied to devices in our test VLAN. I want to allow traffic to 172.23.80.0/24 but deny everything else to 172.16.0.0/12. My acl looks like this; permit udp any eq bootpc any...
Dear All, i am facing the following issue: I have a cisco 7841 ip phone and i am using its switch in order to connect the user PC behind the phone. I need to execute MAB (not 802.1x) through ISE but only for the phone and not for the PC (i need...
Hi, I am trying to get endpoint details based on the endpoint IP address using ISE 2.3 ERS API. I am able to get the endpoint details by passing the MAC address as below. I use Postman to send the get request. https://ers-username:ers-password@i...
Hi,we have ISE 1.2x deployment, ISE not add mac address of new endpoints in Internal Endpoints IDStore due MAB after the advanced license are expired... 24209 Looking up Endpoint in Internal Endpoints IDStore... 24217 The host is not found in the i...
[***TO-DELETE***]
Dear forum , I am trying to find out where i can find the information about specific config change to Cisco ISE . For example : When an admin adds an endpoint (mac address) to an Identity Group i want to know which admin added which mac address...
Hi, Are there any plans to support more than 100 custom endpoint attributes? Please confirm this is the maximum. Thank you !! Jim
HI All, Will ISE node with PAN+MnT persona support PAN auto failover or it needs dedicated PAN persona only? Any limitation with PAN+MnT none for PAN auto failover.
Hi, please, can you help with the follwoing questions related to upgrade from 1.2 to 2.x: 1) The customer is using 4xUCS Servers with Geo Redundancy, 2xUCS per site 2) The license in use is Base License for 6,000 end points 3) According the ISE Tool...
Our customer is not yet using certificates for ISE authentication and are in the processing of deploying CA and PKI services to enable certificate enrollment. They want to audit the population of devices that still don’t have a certificate before ena...
Hi, I have a customer that is implementing Rapid Threat Containment with Firepower and ISE to contain clients. We are using an authorization policy exception with a DACL that are downloaded to the switch and give the client very limited access. We al...
Hi I could not find any ISE ERS API that allows me to perform reports (e.g. like the standard GUI Reports "top Authorizations by user". Did I perhaps not look in the right place? Is the Oracle DB accessible at all? I can't find the answers I ne...
