Upgrade NAC Module 4.8.0 to 4.8.2

[hisham.khreisat]

Dears,

I have a question about upgrade NAC Module, I follow standalone procedure to do the upgrade but I wonder about the upgrade file should I use because on the Cisco site I didn't find the upgrade file from 4.8.0 to 4.8.2.

what I found is nme-nac-upgrade-4.8_2-from-4.6.x.tar.gz ??!!!

So my question If I use the NAC upgrade file I was used for upgrade the CAM & CAS applaiances cca_upgrade-4.8.2-from-4.7.x-4.8.0.tar.gz , it will work without any problems ??

If anyone have a good document or advice I'll be appreciated.

Regards,

Hisham Khreisat

[Tarik Admani]

Hisham,

Let me check on this for you.

Thanks,

Tarik

[hisham.khreisat]

I'm already take the risk to make the upgrade, and yes it is working fine...

Thank you Tariq in advance