This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
i have deployed ISE 2.3 and everythign works fine except client is not getting url redirect page when they open web page on browser.
is there any way that can install manually and doesn't require url redirect. i have copied and paste url from switch port and it worked and compliment but doesn't work automatically.
Solved! Go to Solution.
Could you please tell me the command that was introduced for the L2 redirection on IOS-XE? I am changing VLANs for guest clients there is no SVI for the guests in this network. The clients L3 interface in a firewall outside of the network.
Does anyone know why it's necessary to enable the web server for the redirect to work? We want to use redirection in ISE for a quarantine function and be able to redirect user to a "splash page" informing them that their PC is quarantined. However, enabling the web server on the switch is raising security concerns and I am not sure why we need to enable it when we don't use the internal web server. Does it act as a proxy? Anyway to get the re-direction to work without enabling HTTP?
Edit. The following commands makes the switch not allow any sessions, so at least it will prevent unauthorized logins.
ip http secure-active-session-modules none
ip http active-session-modules none