06-22-2012 09:23 AM - edited 03-10-2019 07:13 PM
i am trying to configure reconfigure dot1x using single authorization profile for all Vlans.
i have added VLAN as a user attribute and specified vlan there.
but when configuring authorisation profile, when i try to select the user attribute in the common tasks, then i cannot find any attributes in the list to select from.
can anyone suggest any way to make it work.
My ACS version is 5.2.0.26.8
Solved! Go to Solution.
06-23-2012 10:34 PM
I am assuming you added this as an internal user attribute
If so, to select in the authorization profile you need to do the following
- by VLAN/ID Name select the "Dynamic option"
- You now can select the dictionary. Select "Internal Users"
- Now you can select which attribute to use. Press the "Select" button to do this
The user attribute will only be displayed if it is of type string
06-23-2012 10:34 PM
I am assuming you added this as an internal user attribute
If so, to select in the authorization profile you need to do the following
- by VLAN/ID Name select the "Dynamic option"
- You now can select the dictionary. Select "Internal Users"
- Now you can select which attribute to use. Press the "Select" button to do this
The user attribute will only be displayed if it is of type string
06-25-2012 04:34 AM
hi,
Thanks for the last line. i tried everything but it was not showing in the attribute list.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide