cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
879
Views
0
Helpful
3
Replies

User Login issue on Cisco ISE version 2.1.0.474

faizan.khan
Beginner
Beginner

User logs in to wireless network with correct(verified) AD credentails ISE throws "invalid password"
Checking through ISE guest logs I notice following error logged.

2018-09-18 08:34:41,331 ERROR [http-bio-172.16.113.45-8443-exec-4331][] guestaccess.flowmanager.step.guest.CredentialStepExecutor -:ex-tieto-tvanderhaar:- User (ex-tieto-tvanderhaar) login failed
2018-09-18 08:34:41,331 ERROR [http-bio-172.16.113.45-8443-exec-4331][] cpm.guestaccess.auth.authentication.NAAuthResultProcessor -:ex-tieto-tvanderhaar:- Can not find the authStoreGUID in the authenticated authentication Result!!

AD diagnostics done on ISE no problems found!

1 Accepted Solution

Accepted Solutions

This should work with the defaults as well. Can you log into the guest portal using an internal user or even a guest? Is your portal setup to use that store for the auth method (under guest portal settings). otherwise please engage the TAC to look at your system

View solution in original post

3 Replies 3

Jason Kunst
Cisco Employee
Cisco Employee
What version of ISE? Are you using the guest (CWA) portal?

Do you have AD allowed in your guest identity store ?

What version of ISE? --- Cisco ISE version 2.1.0.474

Are you using the guest (CWA) portal? --- Yes

Do you have AD allowed in your guest identity store ? --- Yes

This should work with the defaults as well. Can you log into the guest portal using an internal user or even a guest? Is your portal setup to use that store for the auth method (under guest portal settings). otherwise please engage the TAC to look at your system
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: