cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1859
Views
5
Helpful
4
Replies
Highlighted
Beginner

WLC integration with ISE

 

Hello everyone

I am using Cisco Wlc 2504 and Cisco ISE 2.4 in my environment right now. I have a remote location what is connected to my main location. Recently I have installed and configured one more AP at my remote location in Flex Connect mode. I have configured authorization of remote location SSID with ISE, but for some reason users randomly get disconnected.

What could be the issue here?

4 REPLIES 4
Highlighted
VIP Expert

There are many reasons.

 

1. provide the version WLC code - AP Model and core running.

2. How many effected

3. how many users per AP connected if all working ?

4. how is your network stability ?

 



BB


*** Rate All Helpful Responses ***

Highlighted

1. Let me confirm
2. Right now I connected only 3 users for testing, and randomly those 3 users got disconnected
3. Right now hardly 1-2
4. Yes I did ping my switch at remote site, no packet loss
Highlighted

My recommendation would be to run some debugs from the WLC for the client/s having the issue.  Should be something along these lines:

debug mac addr ####
debug client <mac>
debug aaa all enable

debug disable all

Highlighted

Do you want me to run these commands on Remote site AP?

Content for Community-Ad