03-08-2021 07:07 PM
# NETCONF payload <copy_running_config_src xmlns="http://cisco.com/ns/yang/cisco-nx-os-device"> <startup-config/> </copy_running_config_src>
03-15-2021 11:54 AM
Hi @techvisionuhd,
I'm not an expert in with NX-OS, but I want to offer some resources I found, which may help you:
I hope this helps!
03-17-2021 06:29 PM
Thanks Alex. However, those resources were useful for the RESTCONF cisco-nx-os-device module and the openconfig modules. However, the copy_running_config_src rpc doesn't seem to follow the same URI scheme that I use to interact with other components of those two modules.
Strangely, I can't find any documentation online regarding using the copy_running_config_src action via RESTCONF, and the only references I see are for Netconf. I'm hoping if you could confirm whether this feature just isn't supported in RESTCONF on NX-OS?
And if it isn't supported, what is the suggested way to save the configuration on NX-OS via RESTCONF?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide