Network Devices

Hi All, I've replaced switch 3560 with switch 3650 IOS XE, version 16.06.01 and then occur messages via SNMP as below "Discards rate for Interface 'GigabitEthernet1/0/x' is 2.765%, threshold value for this monitor is 1%.  This alarm occurs a lot on m...

Hi,I am new to Cisco ISE API and tried a lot but could not find any information regarding how to create a New Cisco Device in Cisco ISE using API. API documentation for Cisco ISE doesn't show any method to create new device.Does Cisco ISE API allow y...

Spent a while trying to get iperf to work on the guest shell. get through the "pip install iperf3" fine.try to use python to call iperf3 in python, fails. libiperf.so.0 is no where to be found, you sure you installed iperf3?So I spend some time tryin...

Looking for when the HDK will be orderable?

Hey Everyone, I wrote a Python Class for ISE to find/add/remove devices.  It works great when I call it from another python program.  To help my Network Engineers, I want to embed this into a php page/form which will get information like Hostname and...

Running 2 phone systems (Cisco and a Polycom) on 9400 switches, IOS-XE 16.6.2. Since they have different DHCP options, they are in different phone VLANs.   I was hoping to find a way to automate the port configs based on the phone plugged in. We move...

Hi, I am trying to run guestshell on the C9500-40X (StackWise setup) running the Gibraltar 16.10.1 following the procedure described here: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/169/b_169_programmability_cg/guest_shell.h...

Hello, I have been trying to get my head around using NETCONF/YANG with IOS-XE.  I am particularly interested in polling data.  I have enabled Cisco ODM on my device and I show polling is set up.  My question is, how to I get to this data via a RPC c...

Hi, Do we require to add any additional license on a ISR 4000 series router to configure internet failover / load balancing. The router is running on IP BASE license (IP Base License for Cisco ISR 4400 Series). Regards, Alex George

GLC-TE module supports Cat6e cable

If you are a partner and do not see the datasheet of your product posted here please post a request and we will be happy to add it to the appropriate subspace. Message was edited by: Francis Columbus

We have a product that utilizes multicast to distribute near-real-time status updates to clients.  This is a windows application that has been around for a while .  Some customer sites struggle to get multicast setup correctly on their network, and a...

What equipment replaces an ap 1552h located in a bunker of dangerous goods?   I have verified that this ap is EOL   Thanks

Branch Router(cisco ISR4321/K9) is currently working on secondary link and the primary interface is having issue. After taking console of the router we found there was logs getting generated continuously saying serial 1/0/1 is down and serial 1/0/1 i...