cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
298
Views
0
Helpful
1
Replies
Highlighted
Beginner

2960s ENTITY-SENSOR-MIB support

I am trying to poll a stack of 2960s switches for transceiver values (volt, dBm...) . According to documentation, the 2960s should support this MIB, and a poll of sysORID lists the MIB. Cisco even has an example in a configuration guide http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/15-2_1_e/configuration/guide/2960_scg/swsnmp.html#66686

However, polling the switch with .1.3.6.1.4.1.9.9.91 only yields a "No Such Object available on this agent at this OID"

Anyone got any experience with support for this MIB on the 2960 platform?

We are running 15.0(2)SE2

1 REPLY 1
Highlighted
Beginner

Jeppe

Sometimes you will not be able to poll a MIB, instead you will need to poll the different tables and OIDs inside of it. You can try one of the following OIDs:

       - -- entSensorValueTable (1)
         |
          - -- entSensorValueEntry (1) object Details
            |
            | --   entSensorType (1)
            |
            | --   entSensorScale (2)
            |
            | --   entSensorPrecision (3)
            |
            | --   entSensorValue (4)
            |
            | --   entSensorStatus (5)
            |
            | --   entSensorValueTimeStamp (6)
            |
            | --   entSensorValueUpdateRate (7)
            |
            | --   entSensorMeasuredEntity (8)

Content for Community-Ad