9200 RSPAN sessions

[Dan101]

Hi,

I have a 9200 on which I am trying to configure 12 RSPAN source sessions.

the documentation here: Network Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches) - Configuring SPAN and RSPAN [Support] - Cisco says

"The device or device stack supports a total of 66 source and RSPAN destination sessions."

however when I configure the device I get the message:

"Platform can support a maximum of 8 source sessions"

What am I missing?

Thanks

[marce1000]

 - Note sure on that perhaps the documentation is not completely correct , ref https://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3se/consolidated_guide/b_consolidated_3850_3se_cg_chapter_01100101.html#reference_A5581324604C43FDAB318320AC6D4B7E
             >...On each switch, you can configure a maximum of 8 source sessions and 58 RSPAN destination sessions.
                                          (so that equals to 66 too...)

 M.

[Dan101]

Thanks, Marce.  That looks like it's for a 3850 though.