Solved: Re: About Ciscoview Mini-RMON issue

cn1by080byj · ‎02-25-2008

Dear All,

Two question please help

1.router such as 831,871,2801 etc.whether support Mini-RMON(router self have this function )

2.ciscoview mini-rmon whether support device 831,871.

Thanks

Joe Clarke · ‎02-25-2008

You can manually config RMON events and alarms on the routers to watch the dot3StatsFCSErrors and dot3StatsSingleCollisionFrames for the interface in which you're interested. See http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml for more on setting up RMON events and alarms from the CLI.

View solution in original post

Joe Clarke · ‎02-25-2008

The 2801 is supported provided it has an ethernet switching module installed. the 831 and 871 are not supported, and do not have mini-RMON capabilities.

cn1by080byj · ‎02-25-2008

Thanks!

Would you please tell me any other way so that i can setup collision or CRC detection function and can receive alert about this?

Joe Clarke · ‎02-25-2008

You can manually config RMON events and alarms on the routers to watch the dot3StatsFCSErrors and dot3StatsSingleCollisionFrames for the interface in which you're interested. See http://www.cisco.com/en/US/tech/tk961/technologies_configuration_example09186a0080094478.shtml for more on setting up RMON events and alarms from the CLI.