06-19-2008 09:20 AM
I have a VPN Firewall (Cisco PIX 520)
all looks good with the device it is being managed by RME, IPM, DFM and CM, however this device is not generating CiscoWork notifications when it goes offline, we had to reboot the device this morning.
What should I look for to make sure this device is configured properly.
06-19-2008 11:16 AM
First, make sure the PIX is in a Known state within DFM. Next, check the Reachability Settings polling period for this device (or device class) under DFM > Configuration > Polling and Thresholds > Polling Parameters. Make sure you're polling often enough to catch the reload.
06-19-2008 11:27 AM
Hi,
I just checked the device in DFM it is in a known state and as far as the polling parameters everything is at default. Should I change the Reachability settings or something?
06-19-2008 11:29 AM
You might try dropping the reachability polling from four minutes to say, two minutes.
06-19-2008 11:49 AM
I will do make this change now......thanks for the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide