AP Ethernet Port Utilization Historical Report on PI

[Mheena Midori]

Is there a way I can customize PI reporting to provide me a (historical) report that contains each AP ethernet port Utilization?

Current template only allows me to have utilization on specific time. What I want is to have the monthly port utilization of the AP.

I would not want to run an hourly/daily scheduled report and combine all the report manually.

[presleya1]

In addition to that capability i have been exploring ways to configure our PI 3.1 to have on the monitoring dashboard  APs ethernet interface utilization under the Top N interface. This doesn't seems to  have options for APs ethernet interfaces.

I have submitted this feedback to Cisco PI BU. I can view stats for each AP but would prefer to have all in a dashlet  so i can monitor stats through AP ports

[Mheena Midori]

I need that as well...  Please update me once you receive feedback from Cisco. Hopefully this will get addressed to on PI 3.2

[Rob Simkins]

I'd also like to use this report, though I'm not clear on what it represents...

Does anyone have info on why the Rx column is 'MB' MegaBytes? It doesn't make sense...

AP Name	Model	Mac Address	Interface Name	Rx (MB)	Tx (MB)	Event Time
ap1	AIR-AP2802I-E-K9	00:b7:71:44:31:00	GigabitEthernet0	3840.09	1056.34	Thu Jan 31 15:38:49 GMT 2019
ap2	AIR-AP2802I-E-K9	00:b7:71:48:1e:c0	GigabitEthernet0	3803.06	2410.09	Thu Jan 31 15:38:49 GMT 2019
ap3	AIR-AP2802I-E-K9	00:b7:71:4b:49:20	GigabitEthernet0	3795.55	168.28	Thu Jan 31 15:38:49 GMT 2019