I'm wondering about the minimum requirement for this server, can we change the drive options to SSD
Server Option
|
Image Format
|
Bare metal/ISO
|
Hardware Specifications
|
CPU (cores)
|
6
|
|
Memory
|
64GB
Note |
For a multi-host hardware deployment (2 or 3 hosts) only 32GB of RAM is required for each host.
|
|
|
Disk Capacity
|
500GB of available/usable storage after hardware RAID
|
|
RAID Level
|
Hardware-based RAID at RAID Level 10
|
|
CPU Speed
|
2.4 GHz
|
|
Disk I/O Speed
|
200 MBps
|
|
Network Adapter
|
1
Note |
A single network adapter or network interface controller (NIC) is the minimum requirement. For security, we recommend that you use and configure two NICs on the server. See Security in the Limitations and Restrictions section of the release notes for additional information.
|
|
Networking
|
Web Access
|
Required
|
|
Browser
|
The following browsers are supported when viewing and working with the Cisco APIC-EM:
|
Could we use the following.
SSD drives in Raid5 or Raid1 rather than Raid10? These will provide much better performance than traditional disks and should be approximately the same cost as it would be to get the slower disks with Raid10.
Thanks