Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have Cisco Call Manager 7.1.5.11901-1 which is undergoing an upgrade over the next few week, however our server team are spinning up new DNS servers, this will require us to change our current CUCM to the new servers. Can this be done without aff...
I'm wondering about the minimum requirement for this server, can we change the drive options to SSD
Server Option
Image Format
Bare metal/ISO
Hardware Specifications
CPU (cores)
6
Memory
64GB
Note
For a multi-host hardware deployment (2...
We have managed to get the above working please find the enlcosed Link for Windows 2003 Certification Authority.http://www.isaserver.org/img/upl/vpnkitbeta2/pubwebenroll.htmThe problem is that when we revoc the certificate in the revocation list we c...
I have been sent a replacement VPN3000 concentrator due to an intermittent (unknown) fault and appear to have a problem with it's identity certificate. We use the VPN3000 for IPSec clients using RSA certificates, IPSec LAN2LAN using pre-shared-keys a...
Config attached....I have set-up 2 ace20's for SLB which works fine, however I am struggling to understand how to configure stickiness in the way I want to. I want any user on the network whom connects to any of the 5 rservers to have a sticky time o...
Thank you very much - That has worked. I read in one of the manuals that this command had to be included.One other question - If server administrators require remote access to the rservers real IP address (like ours do), as the rservers are not part ...
GilesCapture attached (etherreal).I am the client on 172.21.17.20, the VIP address 172.22.152.6 replies with a RST/ACK. I can see the connection attempt on the ACE:switch/Admin# sh conntotal current connections : 6conn-id np dir proto vlan source ...
