Archive command to save config to flash

[Mmiselo]

Good day,

I have a Cisco router 1921 that doesn't save the config file to the flash like other routers. May you please help with resolving the issue or help with other ways to achieve this.

This is what I configured on all of the routers,

archive
path flash:mybackup
maximum 1
write-memory

Regards

Nelson

[balaji.bandi]

what is the version of the IOS code running on this router ?

can you post below output :

#show version

#show archive

#dir

[Mmiselo]

Hello BB,

See the attached file.

Regards,

Nelson

[balaji.bandi]

if you using USB flash,  that need to change in config also right :

dir flash:   - do you see any output, if not change as below  and test it

archive
path usbflash0:mybackup
maximum 1
write-memory

[Mmiselo]

Hello BB,

Still no luck after changing and write to memory,

path usbflash0:mybackup
maximum 1
write-memory

#sh archive
The maximum archive configurations allowed is 1.
There are currently no configuration saved.
The next archive file will be named usbflash0:mybackup-<timestamp>-0
Archive # Name
1

[balaji.bandi]

try again config t

add some config which not effect and write and post below information again

dir

dir flash:

[balaji.bandi]

just found out to be a bug on only the 1921 Router ( your version does not show as a fixed version).

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCtr74737

Try offloading to FTP or  TFTP or any other destination to see if that works.