cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1228
Views
0
Helpful
2
Replies

ASA 5510 Port forwarding

g-tsagara
Level 1
Level 1

Hello, 

I have issue on my ASA5510. I have nat static translating port 85. It was working, but suddenly stopped. No visible reasons.

Packet Tracer shows tha problem is in NAT rule, but nothing changed before it. 

 

And by the way, Packet Tracer shows same problem om another rule but that one works.

Access granted in Inbound ACL.

2.JPG3.JPG

 

Any help appriciated.

 

Thanks in advance.

2 Replies 2

g-tsagara
Level 1
Level 1

Here is CLI

 

Manual NAT Policies (Section 1)
19 (Inside) to (Outside) source static Apex-01 interface service 85 85
translate_hits = 0, untranslate_hits = 0

 

NikoraASA# sh access-list Outside_access_in
access-list Outside_access_in line 13 extended permit object 85 any object Apex-01 (hitcnt=3) 0x173145c1
access-list Outside_access_in line 13 extended permit tcp any eq 85 host 192.168.1.25 (hitcnt=3) 0x173145c1

balaji.bandi
Hall of Fame
Hall of Fame

Do you have any power Loss, or device running more uptime, if you get chance i will do below :

 

1. clear X-late table

2. reboot ASA and test

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help