10-06-2020 12:31 PM
Hello,
I have issue on my ASA5510. I have nat static translating port 85. It was working, but suddenly stopped. No visible reasons.
Packet Tracer shows tha problem is in NAT rule, but nothing changed before it.
And by the way, Packet Tracer shows same problem om another rule but that one works.
Access granted in Inbound ACL.
Any help appriciated.
Thanks in advance.
10-06-2020 12:55 PM
Here is CLI
Manual NAT Policies (Section 1)
19 (Inside) to (Outside) source static Apex-01 interface service 85 85
translate_hits = 0, untranslate_hits = 0
NikoraASA# sh access-list Outside_access_in
access-list Outside_access_in line 13 extended permit object 85 any object Apex-01 (hitcnt=3) 0x173145c1
access-list Outside_access_in line 13 extended permit tcp any eq 85 host 192.168.1.25 (hitcnt=3) 0x173145c1
10-06-2020 02:26 PM
Do you have any power Loss, or device running more uptime, if you get chance i will do below :
1. clear X-late table
2. reboot ASA and test
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide