08-18-2011 05:26 AM
Hi,
LMS 3.2.1 and ASA 5510 configured for SNMPv3 access,
Inventory and Config sync works, so i think SNMPv3 must work,
but a credential check says SNMPv3 is not supported,
Device Packages are updated,
best regards
Alex
08-20-2011 02:50 PM
You're currently seeing the results of CSCtd67173. SNMPv3 support on the ASA is limited in that read-write support is not available. Therefore, LMS will report "Not supported." This is expected. All SNMPv3 read-only collection operations will work in LMS 3.2.1, however.
08-23-2011 12:05 AM
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide