Auto-archive TFTP on ASR1000

[fb_webuser]

Hello,

could you please tel me how i can setup an auto-archive config on asr1000,i use the basic method,but he can't save the config on tftp,blow my config:

Router(config)# archive

Router(config-archive)# path tftp://X.X.X.X/folder1/Folder2/conf1

Router(config-archive)# write-memory

Router(config)# time-period 1440

here is error:

Archive # Name

1 :Error - Timed out <- Most Recent

2 :Error - Timed out

---

Posted by WebUser Jamall Haddann from Cisco Support Community App

[Leo Laohoo]

archive

log config

logging enable

hidekeys

path tftp://1.2.3.4/folder1/folder2/conf1/$h-

write-memory

time-period 10080

[fb_webuser]

Hi Leo!

thinks you so mush for your response,

on time-period 10080 can i choose 1440 ?or i must take 10080 ?

---

Posted by WebUser Jamall Haddann from Cisco Support Community App

[Leo Laohoo]

on time-period 10080 can i choose 1440 ?or i must take 10080 ?

Whatever your heart desires.

What I have propose is this:

1.  When someone saves the config, the config is saved at destination; and

2.  At X amount of hours, if no one has saved the config, the config is saved at destination.

[csco11579831]

Thank you Leo!

By cons I have done the same config, but it does not work : (

I've seen on any document on the Internet:

Router (config-archive) # path disk0: myconfig

you know what that means?

is that it can help me?

sincerely,