07-17-2012 09:53 AM
Hello
CW LMS 3.2
Is there a wsy to define an historical/realtime availability report based on ICMP information response from CW LMS server to all elements manager on our network.
Do we need to use HUM or IPMS.
Currently installed:
CiscoWorks Common Services | 3.3.0 |
Campus Manager | 5.2.1 |
CiscoView | 6.1.9 |
CiscoWorks Assistant | 1.2.0 |
Device Fault Manager | 3.2.0 |
Internetwork Performance Monitor | 4.2.0 |
Integration Utility | 1.9.0 |
LMS Portal | 1.2.0 |
Resource Manager Essentials | 4.3.0 |
Health and Utilization Monitor | 1.2.0 |
Regards Tank you.
Solved! Go to Solution.
07-26-2012 12:20 AM
If you need availability of certain device you may consider IP SLA, where you can configure your device for ICMP ECHO or PATH ECHO kind of operation, which also measure availability.
This can be done using IPM module of LMS, please check :
-Thanks
Vinod
07-26-2012 12:17 AM
HUM has one availabityt report, but it is snmp based and not ICMP.
This report displays the device availability data for each device polled for the Device Availability template. The information is presented using tables and graphs.
For more details check:
-Thanks
07-26-2012 12:20 AM
If you need availability of certain device you may consider IP SLA, where you can configure your device for ICMP ECHO or PATH ECHO kind of operation, which also measure availability.
This can be done using IPM module of LMS, please check :
-Thanks
Vinod
07-30-2012 09:13 AM
Tanks, I'm currently applying your suggest
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: