※ C4507R+E, DHCP Binding IP Address display issue (Version:3.3.2XO)
I have been using the DHCP server function of the Cisco switch.(C4507R+E)
And, I have been using the recommended Version from Cisco (3.3.2XO)
but, DHCP Binding IP Address Display Problems found.
IP Address last number no display.(192.168.220.19X)
Although the test with a higher version of "3.7.0,3.6.0", is the same phenomenon
is this a problem that cisco ios display bug?
And i haven't found in cisco bug tool.
yet, Is the bug did not find?
How can you solve this problem?
Please tell me the solution.
Note that although performing a "terminal width" command, the phenomenon is the same.
This is not a terminal program issues.
See below for details
“When compared to the ARP tables, IP / MAC address will recognize the problem”
1.Device Name and Version
C4507R+E#show version Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSALK9-M), Version 03.03.02.XO RELEASE SOFTWARE (fc1) License Information for 'WS-X45-SUP8-E' License Level: ipbase Type: Permanent Next reboot license Level: ipbase |
2.DHCP binding status of the problem
C4507R+E #show ip dhcp binding Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type State Interface Hardware address/ User name 192.168.220.19 018c.3ae3.9446.13 May 25 2015 12:32 PM Automatic Active Vlan220 192.168.220.19 01b8.ee65.4039.fc May 25 2015 11:37 AM Automatic Active Vlan220 192.168.220.19 0130.d6c9.175f.6a May 18 2015 01:38 PM Automatic Active Vlan220 ----Omission---- ! C4507R+E#show ip dhcp binding 192.168.220.19 % Adddress 192.168.220.19 is not in the database. ! C4507R+E#show ip dhcp binding 192.168.220.193 IP address Client-ID/ Lease expiration Type State Interface Hardware address/ User name 192.168.220.19 01b8.ee65.4039.fc May 25 2015 11:37 AM Automatic Active Vlan220 ! C4507R+E#show ip arp 192.168.220.193 Protocol Address Age (min) Hardware Addr Type Interface Internet 192.168.220.193 0 b8ee.6540.39fc ARPA Vlan220 |
