09-04-2008 04:39 AM
Hi,
I'm using LMS 3.1 and I've got a problem when I want to delete MAC-address entry in the "right-click - Configure / Category - Port Security / MAC Address Table "
I'm trying to do so on 3560 Switches with snmp v3. Is there any specific write view to configure ?
Note that any other changes made by ciscoview on those devices are applied successfully. Only MAC address deletion are causing problem.
Thanks.
09-04-2008 04:56 AM
What does your SNMP configuration look like on the switch now?
09-04-2008 05:27 AM
snmp-server engineID local 017402850396
snmp-server group groupname v3 auth write v1default
snmp-server group groupname v3 auth context vlan-2
snmp-server group groupname v3 auth context vlan-3
snmp-server group groupname v3 auth context vlan-4
snmp-server group groupname v3 auth context vlan-5
snmp-server group groupname v3 auth context vlan-6
snmp-server group groupname v3 auth context vlan-7
snmp-server group groupname v3 auth context vlan-8
snmp-server group groupname v3 auth context CONTEXT
snmp-server group username v3 auth notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFF F0F
switch#sh snm user
User name: username
Engine ID: xxxx
storage-type: nonvolatile active
Authentication Protocol: SHA
Privacy Protocol: None
Group-name: groupname
09-04-2008 08:44 AM
This is fine. You may be hitting a bug, or a limitation in the device package. I suggest you open a TAC service request so more debugging can be done. Unfortunately, I do not have the time to dig into this in more detail right now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide