Cannot delete MAC-address in Ciscoview

[gregory.aniorte]

Hi,

I'm using LMS 3.1 and I've got a problem when I want to delete MAC-address entry in the "right-click - Configure / Category - Port Security / MAC Address Table "

I'm trying to do so on 3560 Switches with snmp v3. Is there any specific write view to configure ?

Note that any other changes made by ciscoview on those devices are applied successfully. Only MAC address deletion are causing problem.

Thanks.

[Joe Clarke]

What does your SNMP configuration look like on the switch now?

[gregory.aniorte]

snmp-server engineID local 017402850396

snmp-server group groupname v3 auth write v1default

snmp-server group groupname v3 auth context vlan-2

snmp-server group groupname v3 auth context vlan-3

snmp-server group groupname v3 auth context vlan-4

snmp-server group groupname v3 auth context vlan-5

snmp-server group groupname v3 auth context vlan-6

snmp-server group groupname v3 auth context vlan-7

snmp-server group groupname v3 auth context vlan-8

snmp-server group groupname v3 auth context CONTEXT

snmp-server group username v3 auth notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFF F0F

switch#sh snm user

User name: username

Engine ID: xxxx

storage-type: nonvolatile active

Authentication Protocol: SHA

Privacy Protocol: None

Group-name: groupname

[Joe Clarke]

This is fine. You may be hitting a bug, or a limitation in the device package. I suggest you open a TAC service request so more debugging can be done. Unfortunately, I do not have the time to dig into this in more detail right now.