12-12-2012 09:53 AM
Hi,
I added or discovered all the NAM modules on my network to PI1.2. however, when i try to create a capture session i don't see my NAM modules list. or i don't see my NAM modules as datasources. this is despite the fact that the NAM modules are added to the devices list on PI1.2. let me know how to get this working.
Thanks,
Kerim
Solved! Go to Solution.
01-18-2013 10:47 AM
Hello Kerim,
We recently published a Cisco Prime Infrastructure Deployment Guide on cisco.com. There is a section on how to manage NAMs in PI 1.2, as well as how to capture and decode packets using PI 1.2.
Hope this helps,
Tejas
01-18-2013 10:47 AM
Hello Kerim,
We recently published a Cisco Prime Infrastructure Deployment Guide on cisco.com. There is a section on how to manage NAMs in PI 1.2, as well as how to capture and decode packets using PI 1.2.
Hope this helps,
Tejas
01-18-2013 11:08 AM
thanks Tajesh! yes, i hope so too. things were getting frustrating. will get back to you once i deployed PI per the new guide line. thanks
01-18-2013 02:25 PM
Thanks for the heads up on the new deployment guide, Tejas. That's useful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide