Catalyst 2950: SNMP queries

[zvivered1]

Hello,

I want to get the following information from CISCO's Catalyst 2950:

1. Port's status: Up / Down

2. What MAC is connected to the port

3. Number of messages transmitted and received from the port.

What OID should I use for this purpose ?

For a reference I want to use ireasoning MIB browser.

What MIB file should I download from CISCO's FTP site ?

Thanks,

Zvika. 

[Joe Clarke]

Up/down : 1.3.6.1.2.1.2.2.1.8 (ifOperStatus)

MAC addresses : 1.3.6.1.2.1.17.4.3.1.1 (dot1dTpFdbAddress)

Number of "messages" (I assume you mean packets) : 1.3.6.1.2.1.2.2.1.11 (ifInUcastPkts), 1.3.6.1.2.1.2.2.1.17 (ifOutUcastPkts)

For these objects you'll want the IF-MIB and the BRIDGE-MIB.