09-17-2020 11:28 AM
Hi All,
Very new to switch configuration. Picked up a refurbished 3750-48PS that I want to use in my home network. Yes, I will have a bunch of ports throughout the house. Can you point me to a resource on setting this up? I am fairly familiar with CLI, just not Cisco. Will be using my Mac to connect.
TIA
-mark
Solved! Go to Solution.
09-17-2020 10:15 PM
here is a link to a good express set up of switch for home use.
https://support.hpe.com/hpesc/public/docDisplay?docId=c02936950&docLocale=en_US
there are heaps of links to cli commands to program the switch for further use.
for eg
09-17-2020 10:15 PM
here is a link to a good express set up of switch for home use.
https://support.hpe.com/hpesc/public/docDisplay?docId=c02936950&docLocale=en_US
there are heaps of links to cli commands to program the switch for further use.
for eg
09-18-2020 09:48 AM
Thanks so much!
09-18-2020 05:33 PM
Glad to be of help
I can remember setting up my home network for Cisco studies. It was a job and a half, but stood me in good stead for the certification exams
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide