Network Management

I am currently in the process of trying to upgrade the IOS of a ISR 4331 currently running the following:Cisco IOS XE Software, Version 03.13.04.S - Extended Support ReleaseCisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 1...

Hello guys, I'm doing some studies on Loop Guard, BPDU Guard, BPDU Filter and Root Guard. I want to confirm with you if I understood all the functions correctly, below an explanation of each one: Loop Guard: active on root ports and in a block state,...

We have a team of L1 people who currently have privilege level 5 access to our network devices. Apparently they don't have access to all the 'show' commands. Commands like 'show logging' is very basic for basic checks, which they don't have. I'm look...

Cisco IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M), Version 15.2(4)M11, RELEASE SOFTWARE (fc2) hi I'm trying to config and run SNMPv3 for first time I but it doesn't work. now I have an router on my lab and a server with multiple snmp manage...

I would like to upgrade from IOS 16.9.3 to 16.12.4 to resolve an SNMP bug. However, all the documentation I am finding seems to apply to stacked switches.  Our 9500s are not stacked.  I did find one article that talked about using ISSU mode, but I am...

I have a Cisco RV325 router that I configured on a test network several months ago.  Somehow I changed the default 192.168.1.1 subnet to 10.0.1.1.  My configuration is done and working, and now I want to change the subnet to 192.168.5.1 but have not ...

Hi, can anyone confirm that, Cisco Prime Infrastructure does not support any Cisco Small Business AP, such as WAP121, WAP125, WAP561, WAP321?

Hello,I am working in a large network where hundreds of Routers, Switches and firewalls are present and I need to track the licenses for those devices which are about to expire, already expired or required renewal.There is an option of Cisco Smart Li...

We have a WAP571 and set the scheduler between 08:00-17:00 for the workinghours which works fine.Now in another area we connected a TP-Link as a wireless repeater to the WAP571 which also fine exept for the scheduler.Is this normal that the wireless ...

Hi, I am trying to upgrade Cisco Prime Infrastructure 3.4 to 3.7 version. PI-Upgrade-31x_32x_33x_34x_to_3.7.0.0.159.tar.gz file is 4.4GB size, but when I try to transfer it to Prime via TFTP - it shows as if the file size is 224MB. After it is comple...

Ihave cisco sw sg250 26 port this sw connected with two uplink one to the sw 2960 and another with sg 250 and the core sw 3650 in 3650  I created vlans and activite vtp version 3 but sg 250 didnot understand vtp......this infrastructure now when i re...