Cisco 4500X lost its cpu snmp oid

as00001111 · ‎08-06-2018

Hey all!

I was monitoring the cpu utilization with that oid: 1.3.6.1.4.1.9.9.109.1.1.1.1.4.1000

A few days ago, we had a power loss, the cisco switch was powered off.

As of that, I can't get the cpu utilization anymore. The oid doesn't exist anymore.

What can I do?

Thank you!

marce1000 · ‎08-06-2018

- Try walking the OID partially ; perhaps it got slightly changed.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

as00001111 · ‎08-06-2018

How exactly?

marce1000 · ‎08-07-2018

- Something like :

snmpwalk -v 1 -c community switchname 1.3.6.1.4.1.9.9.109.1.1.1.1.4

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

as00001111 · ‎08-07-2018

it says:

iso.3.6.1.4.1.9.9.109.1.1.1.1.4 = No Such Object available on this agent at this OID

marce1000 · ‎08-07-2018

- Try shorting the OID start-string even more when testing with snmpwalk use e.g: 1.3.6.1.4

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

as00001111 · ‎08-07-2018

I did that and I get a lot of results.

What am I supposed to do now?

The problem is:

I did snmpwalk -v 2c -c string hostname 1.3.6.1.4.1.9.9

and the results are:

1.3.6.1.4.1.9.9.106.xxxx and then

1.3.6.1.4.1.9.9.117.xxxx

"109" is completely missing.