cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
502
Views
0
Helpful
4
Replies

Cisco CPNR SNMP

Islam_Hassanin
Level 1
Level 1

 

Hello Dears,

Kindly i’m trying to use SNMP to monitor Free Leases on CPNR for specific scope. i have configure scopes, traps and bind these traps to scopes.

the issue that OID for free leases not exist, i used below MIB and OID: https://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.120.1.2.7&translate=Translate&submitValue=SUBMIT&submitClicked=true

but i’m getting:

CISCO-NETWORK-REGISTRAR-MIB::cnrNotifDHCPScopeFreeAddrLow = No Such Object available on this agent at this OID.

Islam_Hassanin_0-1674547941358.png

CPNR IP: 10.100.10.60 & Community: cpnr

Any Ideas ?

1 Accepted Solution

Accepted Solutions

Islam_Hassanin
Level 1
Level 1

As per Cisco TAC, these OIDs can't be used to be pulled. they are just for Trapping alarms on the UI & CLI.

View solution in original post

4 Replies 4

Hello,

these errors usually have to do with the version of (CPNR in your case) installed. Which one are you running ?

marce1000
VIP
VIP

 

 - This one has it :  https://github.com/simonjj/SnmpMibs/blob/master/CISCO-NETWORK-REGISTRAR-MIB.mib , following the comment line above as @Georg Pauwen mentioned probably versioning related , 

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

@marce1000 @Georg Pauwen 

i'm using CPNR v10.1, and i use this MIB file already as shown below:

Islam_Hassanin_0-1674554024585.png

 

Islam_Hassanin
Level 1
Level 1

As per Cisco TAC, these OIDs can't be used to be pulled. they are just for Trapping alarms on the UI & CLI.

Review Cisco Networking for a $25 gift card