ā03-24-2011 01:12 PM
hello
I have installed CiscoWorks LMS 3.2 on Windows 2008 server VM on ESX4.1 but Cisco daemon manager don't start.
I have try manual restart the service and I I have also restart the VM but it not woking.
please can you help on this.
Solved! Go to Solution.
ā03-24-2011 01:51 PM
Hi ,
--configure the swap size to double the size of RAM on the server and then check the issue..
--Also add casuser into the administrator group
I hope this will help !!
Thanks--
Afroj
ā03-25-2011 04:29 AM
Hi ,
Please try the previous steps and let me know how it works !!!
---------------------------------------------------------
If above does not works then
Try to Reset the Casuser as below :
go to Command Prompt :
NMSROOT\CSCOpx\setup\support >resetCasuser.exe
then try to Restart the Daemon Manager . If issue still exist then attach the Erro Sceen shot and syslog.log (If possible)
Thanks--
Afroj
ā03-24-2011 01:51 PM
Hi ,
--configure the swap size to double the size of RAM on the server and then check the issue..
--Also add casuser into the administrator group
I hope this will help !!
Thanks--
Afroj
ā03-24-2011 01:51 PM
Hi ,
--configure the swap size to double the size of RAM on the server and then check the issue..
--Also add casuser into the administrator group
I hope this will help !!
Thanks--
Afroj
ā03-25-2011 04:11 AM
hi Ahmad,
thik for your reponse,I have messing the message whene I try to restart the service I get this message below:
please confime if you have some cas. before i try to do your solution
think for you help.
best regards
ā03-25-2011 04:29 AM
Hi ,
Please try the previous steps and let me know how it works !!!
---------------------------------------------------------
If above does not works then
Try to Reset the Casuser as below :
go to Command Prompt :
NMSROOT\CSCOpx\setup\support >resetCasuser.exe
then try to Restart the Daemon Manager . If issue still exist then attach the Erro Sceen shot and syslog.log (If possible)
Thanks--
Afroj
ā03-28-2011 01:17 AM
hello,
think you for your assitance it work fine.
Best regards.
ā03-29-2011 04:19 AM
hello,
think you for your assiatnce,but I get another probleme.
when I login in the LMS portal I get an erreur.the pages can not be redirected.
any idde on this.
ā03-30-2011 12:02 AM
HI ,
Please try the below workaround !!
open regedit.exe, and create or modify the following registry key DWORDs: HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0\1A10 : DWORD : 0 HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\1\1A10 : DWORD : 0 HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\2\1A10 : DWORD : 1 HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3\1A10 : DWORD : 1 HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4\1A10 : DWORD : 3 Then restart CiscoWorks Daemon Manager
Thanks--
Afroj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide