Hello, team.
I am trying to configure Model Driven Telemetry on my ASR920 router (IOS XE 16.09.05f) but i got invalid status for it.
I noticed that the IP addresses of Receiver (telegraf collector) in configuration file and in the show command are different.
In additional i see icmp packets from asr920 on my collector but no any others packets so L3 connectivity is OK.
Configuration looks like:
telemetry ietf subscription 1
encoding encode-tdl
filter xpath /interfaces-ios-xe-oper:interfaces/interface/statistics
source-address 172.30.36.130
stream yang-push
update-policy periodic 5000
receiver ip address 172.24.223.150 57000 protocol cntp-tcp
end
But "show" command has another IP addresses:
show telemetry ietf subscription 1 detail
Telemetry subscription detail:
Subscription ID: 1
Type: Configured
State: Invalid
Stream: yang-push
Filter:
Filter type: xpath
XPath: /interfaces-ios-xe-oper:interfaces/interface/statistics
Update policy:
Update Trigger: periodic
Period: 5000
Encoding: encode-tdl
Source VRF:
Source Address: 127.255.255.255
Notes: Unknown error
Receivers:
Address Port Protocol SecurityProfile
------------------------------------------------------------------
127.255.255.255 57000 cntp-tcp Do you have any idea why the router uses wrong 127.255.255.255 address?
Thanks!
