cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
310
Views
3
Helpful
3
Replies
Highlighted
Beginner

Cisco PI2.0 -- Settings for Client-Acquisition

Hi all,

migrating from LMS 4.2x to PI 2.0 I'm familiar with the UserTracking-Acquisition-Process and

its possible settings like Acquisition-Schedule, PingSweep, Excluded Subnetz, DHCP-Handling and so on.

Now within PI 2.0 it seems that these settings are no longer available to change (Administration>System Settings>Client).

With what parameters does PI 2.0 poll client data and where can these settings be modified?

Maybe anybody passed that problem out there.

Thanks for any feedback.

Lothar

3 REPLIES 3
Highlighted
Cisco Employee

Hi Lothar,

we donot have such kind of settings in PI ..

you can check the box [ Poll clients when client traps/syslogs received ] under Administration > Client > Client  Discovery it should poll based on receiving the traps. That feature is  not enabled by default

**wired clients polling cycle  (2 hours default).

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Highlighted

Hi Afroz,

thanks for your feedback.

Are there any plans to implement the wired clients aquisition settings as known from LMS?

In our (LMS)-environment UT-Discovery takes about 1-2hours, so decreasing network-load due

to managment-traffic should be customizable.

Should be worth a thought.

Lothar

Highlighted

I am not sure ,if these will be added in future releases..

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Content for Community-Ad