08-08-2013 02:32 AM
Hi,
I recently installed Cisco Prime Infrastructure 1.3 per the set up guide. I was able to login into the webinterface.
Then I insert the radius server and reload ncs. Since then I'm not able to login to the web interface. I get the following error message "Invalid Username or Password. Please try again". Even when I set the ncs root user with a new password. One issue could be that i forgot the enable fallback to local.
Is there a way to change the radius config back via cli?
Thanks a lot
Hansruedi
12-02-2013 05:28 AM
Hi,
I have the same issue. After a reload on Prime 1.3, I'm not able to login with my Root login to the web interface.
But for my part, I'm sure I checked Fallback to local.
I was able to login with my admin account in CLI. Like Hansruedi, I was able to changed the root password with the command "ncs password root password" but the issue still the same.
Any ideas ?
Thanks
12-04-2013 05:15 AM
12-04-2013 06:48 AM
Hi Hansruedi,
Thanks you for your help and your time.
I followed your recomandation until the fourth step.
But after this step, I lost the web page connection.
I check nsc status but all is running :
NMS still stopped. NMS must be running to have an access by web page ?
I restart Prime (by reload command) but nothing changed.
Thanks
12-04-2013 07:12 AM
Hoho
After half an hour, the GUI coming back !
Now I can login with my root login.
Thx a lot !
All my configuration on AAA and radius server was not changed.
What exactly doing this script ?
04-29-2014 08:40 AM
Hi Hansruedi,
right now I'm having the same issue so I thank you for this, I've got a question about this though, how do you apply this? Do I just copy and paste the script via SSH?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide