Cisco Prime LMS 4.2 - How to Change The Temperature Threshold

[udid]

Hello,

I have a question:

In Cisco Prime LMS 4.2, I get "OutOfRange" events on high temperature threshold.

For example, a device has 46.0 C while the high temperature threshold is 45.0 C

I tried to change the high temperature threshold but the only option I have is to change the "Relative Temperature Threshold".

This value indicates how close the current temperature value  can be to the value that triggers an emergency shutdown, expressed as a  percentage of the emergency shutdown value. For example, if the shutdown  temperature is 50° C and the Relative temperature threshold is 10%, the  OutofRange event occurs if the temperature exceeds 45° C.

Does anybody know if there is an option to change the high temperature threshold expressed as degrees and not as a percentage of the emergency shutdown value.

Thanks.

[Vinod Arya]

Check the following document, it will be helpful to do this:

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/mnt-setup.html#wp1533162

-Thanks