Cisco Prime script /template to remove configuration

[Chhabi Thapa]

We have around 500 Cisco 3850-48-FS and 3850-12-S switches,IOS 3.07.05 in our environment.In 100+ different rooms they are installed as a stack as per the room requirement.Now we have to remove few configurations from switchports of all the stacks.Is there any script/template for Cisco Prime Infrstructure 3.5 to remove the configurations.

NOTE : Installed switch qty differs in all rooms like some have 6 stacked together,some have 3 and some rooms have Cisco 3850-48-FS and 3850-12-S stacked together.

[Francesco Molino]

Hi

First the scripting language in prime is VTL and it's kind of limited.

Now if you want to remove some configuration under interfaces, you can use the compliance module that'll check the config and then do a remediation.
Here a documentation:

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/user/guide/pi_ug/compliance.html

There are some policies already pre configured in prime.